The machine are provided with the necessary accessories allowing to spray/foam, rinse and vacuum. Some accessories are supplied as standard or optional, such as: pane wiper, floor wiper, fleece. All the accessories can be stored on the machine, so they can be easily used and carried.
Thanks to a special accessory put on the floor, it is also possible to start vacuuming the liquid from the floor, while the operator is rinsing. In this case, the wet vacuum tool is used in the end to dry the floor completely. While walls are left to dry alone, sanitary fixtures and special corners can be dried with a special blower hose, connected to the machine, without using any sponge and therefore avoiding any cross-contamination.
|Vacuum motor||1000W||Bar Pressure||28|
|Performance||120 Tiles per 25minutes||Compressor||350W|
|Water Consumption||70 litres||Chemical Consumption||1200 grams|
|Defoamer Consumption||max 70 grams||Chemical dilution during foaming||Pre-set around 4%|
|Accessories for injection-extraction cleaning||Optional||Spray hose/Vacuum hose length||10 / 7,5m|